Updated Nov 19, 2026· 14 min read

Key takeaways

  • Replace a kitchen sink faucet handle with one of five confirmed picks, from universal 40mm levers to brand-specific kits for Moen and Delta faucets.

The best kitchen sink faucet handle for most single-lever faucets is the uxcell 40mm lever in black, because it fits the common 40mm cartridge, uses a 10 by 10mm square stem, and comes with the wrench, screw, and hot and cold marks needed for the swap. If the faucet uses a brand-specific valve, the right pick is the kit made for that valve, not a universal lever. This guide covers five confirmed handles: two universal levers, two brand-specific lever kits for Moen and Delta valves, and one genuine Moen knob kit, each with a confirmed ASIN and a fit note.

A replacement handle is a small part with a strict fit. The cartridge size, the stem shape, and the valve series all have to match, and a handle that looks right can still fail to seat on the stem. The sections below give the confirmed specs for each pick, the valve or cartridge it fits, and the traps to avoid. Measure the old handle and the stem before ordering.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • uxcell Faucet Lever Handle, 40mm, Black
  • standwme H79 Single Metal Lever Handle Kit
  • Ultrimkit Replacement Lever Handle Kit
  • Moen 100710 Posi-Temp Replacement Knob Handle Kit
  • uxcell Faucet Lever Handle, 40mm, Silver
  • How to Choose a Kitchen Sink Faucet Handle
  • Frequently Asked Questions
  • Conclusion
  • Product and ASIN Reference

uxcell Faucet Lever Handle, 40mm, Black

Check price on Amazon

Check price on Amazon

The uxcell 40mm lever in black is the most flexible pick in this guide, and it is the one to start with when the faucet is a standard single-lever kitchen, bathroom, or shower faucet with a 40mm cartridge. The lever is made from zinc alloy, which holds its shape, resists corrosion in a wet sink area, and takes a dark finish well. The black finish is a practical match for modern kitchen faucets in matte black or dark bronze, and it also works as a contrast piece on a chrome or stainless faucet.

Fit is the whole story with this handle. The lever is built for a 40mm cartridge and a 10 by 10mm stem, so the two numbers to confirm before ordering are the cartridge diameter and the stem shape. A 40mm cartridge is the most common size in single-lever kitchen faucets, and a 10 by 10mm square stem is the matching standard. If the old cartridge is a different size, or the stem is round, splined, or a different square size, this lever will not seat. Measure the stem with a caliper or a ruler, and check the cartridge size on the old cartridge or in the faucet manual.

The lever measures 4.33 inches long and 1.77 inches wide, which gives a comfortable grip for turning the water on and off with wet hands. At just over four inches, it is long enough to grip easily and short enough to clear most sink layouts. What sets this pick apart is the hardware in the box: the kit includes the handle, a wrench, a screw, and red and blue marks for hot and cold, so the swap can be done without hunting for a separate set screw or an index button. This is a handle-only replacement, not a full faucet, so the cartridge, the valve body, and the spout all stay in place. The black uxcell lever is the budget pick in this guide, a generic replacement part with no brand-specific fit guarantee, and for a standard 40mm single-lever kitchen faucet it is the simplest and most direct replacement here.

Specs

Spec Detail
Brand uxcell
Model a23122700ux0577
Material Zinc alloy
Color Black
Cartridge size 40 mm
Stem 10 x 10 mm
Length 4.33 in
Width 1.77 in
Handle type Lever
Fits Kitchen, bathroom, and shower faucets
Included Handle, wrench, screw, red and blue marks
Weight Not stated
ASIN B0CXPRWRRS

standwme H79 Single Metal Lever Handle Kit

Check price on Amazon

The standwme H79 is a single metal lever handle kit made for Delta 1300 and 1400 series faucets, and it is the pick for a Delta valve that needs a new lever. The handle is made from tin alloy with a chrome finish, which matches the polished chrome trim found on many Delta faucets. The part number is ShowerHandle-1, and the listing dates to October 24, 2024. At research time it held a best sellers rank of 94 in the Faucet Handles category.

The fit rule for this pick is strict and simple: it fits Delta 1300 and 1400 series faucets, and nothing else is promised. Delta uses different valve series across its faucets, and a handle made for the 1300 and 1400 series will not seat on a different Delta valve. Before ordering, confirm the valve series on the faucet or in the faucet manual, and confirm the part number ShowerHandle-1 on the listing. The kit is a single metal lever, so it replaces one handle, and the chrome finish should match other chrome trim on the same faucet.

This pick needs an honest note about where it belongs. The H79 is listed as a tub and shower handle kit, because the Delta 1300 and 1400 series are tub and shower valves. It is included in this guide because the Delta valve family is one of the most common reasons a reader searches for a replacement faucet handle. The fit depends on the valve series, not on the room the faucet is in. If the faucet at the sink is not a Delta 1300 or 1400 valve, this kit will not fit, and the universal lever in the first section is the better choice. Tin alloy is a solid choice for a handle used many times a day, and the chrome finish protects the surface from water spots and wear. The kit is a handle-only replacement, so the valve, the cartridge, and the trim plate stay in place. The standwme H79 is the mid-range pick in this guide: a brand-specific kit with a confirmed valve fit, below a genuine brand-name part because it is an aftermarket kit.

Specs

Spec Detail
Brand standwme
Part number ShowerHandle-1
Material Tin alloy
Finish Chrome
Compatible with Delta 1300/1400 series faucets
Handle type Single metal lever
Date First Available October 24, 2024
Best Sellers Rank 94 in Faucet Handles
Dimensions Not stated
Weight Not stated
ASIN B0DKSB8RMD

Ultrimkit Replacement Lever Handle Kit

Check price on Amazon

The Ultrimkit replacement lever handle kit is made for Moen Posi-Temp and Chateau faucets, and it is the pick for a Moen valve that needs a new lever. The kit is made from stainless steel with a chrome finish, which matches the polished chrome trim on Moen faucets and resists corrosion in a wet environment. The part number is ACC01273-CH, and the listing carries the UPC 739333564544. The handle attaches with a screw, which is the standard attachment for a Moen lever kit, and the listed product dimensions are 3 inches.

The fit rule for this pick is the same as for the Delta kit above: it fits Moen Posi-Temp and Chateau faucets, and nothing else is promised. Before ordering, confirm the faucet is a Moen Posi-Temp or Chateau model, and confirm the part number ACC01273-CH on the listing. A lever made for a Moen valve will not seat on a Delta valve or on a generic 40mm cartridge, so the brand and series check matters more than the look of the handle.

Stainless steel resists rust and holds a polish through years of wet hands and cleaning. The screw attachment is simple and secure: the lever seats on the stem and the screw holds it in place, the same method the original Moen handle uses. This pick also needs an honest note about where it belongs. The Moen Posi-Temp and Chateau faucets are tub and shower faucets, so this kit is listed as a tub and shower handle kit. If the faucet at the sink is not a Moen Posi-Temp or Chateau model, this kit will not fit.

One variant trap deserves a warning. A brushed-nickel version of this same kit is listed on the Canadian storefront with the GTIN 00739333564506, and it is a different listing from the chrome kit in this guide. The chrome kit here is ACC01273-CH, and the brushed-nickel version is a separate code. Confirm the chrome finish and the part number together on the listing. The Ultrimkit kit is the mid-range pick in this guide: a brand-specific stainless steel kit, below a genuine Moen part because it is an aftermarket kit.

Specs

Spec Detail
Brand Ultrimkit
Part number ACC01273-CH
UPC 739333564544
Material Stainless steel
Finish Chrome
Compatible with Moen Posi-Temp and Chateau faucets
Attachment Screw
Product dimensions 3 in
Weight Not stated
ASIN B0FXRS71BX

Moen 100710 Posi-Temp Replacement Knob Handle Kit

Check price on Amazon

The Moen 100710 is a genuine Moen replacement knob handle kit for Posi-Temp one-handle tub and shower faucets, and it is the pick for a reader who wants the original brand part rather than an aftermarket kit. The model number is 100710, and the listing carries the UPC 026508059524. The kit is a white and chrome knob insert: a white knob body with a chrome insert. A price-history record shows the listing was actively tracked with a current Amazon offer in March 2026, which supports that the kit is still sold.

A knob turns rather than pulls, and it suits a faucet where the handle is a round knob. The 100710 is a one-handle kit, so it replaces a single knob on a Posi-Temp valve. The Posi-Temp valve is a pressure-balancing valve, and the knob kit is made to fit that valve and no other. Before ordering, confirm the faucet is a Moen Posi-Temp one-handle model, and confirm the model number 100710 on the listing.

A genuine part fits exactly, because it was made for the valve it fits. The trade-off is that it fits fewer faucets than a universal lever. That is the right trade when the goal is an exact replacement. The 100710 is a tub and shower knob kit, included here because the Posi-Temp valve is one of the most common Moen valves. If the faucet at the sink is not a Moen Posi-Temp one-handle model, this kit will not fit.

The white and chrome finish is worth a careful look before ordering. The knob body is white, and the insert is chrome, which matches the classic Moen trim but looks different from an all-chrome lever. Confirm the colorway on the listing: the code in this guide is for the white and chrome version only. The Moen 100710 is the premium pick in this guide: a genuine Moen part, and the premium here buys an exact brand fit.

Specs

Spec Detail
Brand Moen
Model 100710
UPC 026508059524
Type One-handle tub and shower replacement knob handle kit
Color White and chrome knob insert
Compatible with Moen Posi-Temp one-handle faucets
Dimensions Not stated
Weight Not stated
ASIN B00083K7KW

uxcell Faucet Lever Handle, 40mm, Silver

The uxcell 40mm lever in silver is the same universal kit family as the black lever in the first section, in a silver finish. It is made from zinc, it is L-shaped, and it fits a 40mm cartridge, which makes it the same fit story as the black lever: confirm the cartridge is 40mm, confirm the stem matches, and the lever will seat. The silver finish is the practical choice for a chrome or stainless kitchen faucet, where a silver lever blends in with the rest of the trim.

The reason this pick is in the guide is the finish. A silver lever on a chrome faucet looks like it belongs there, while a black lever on the same faucet looks like a replacement. The silver uxcell lever gives the same universal fit as the black one with a finish that matches the most common kitchen faucet trim. The L-shape is a standard lever profile, with a short horizontal grip and a vertical drop to the stem.

The fit numbers are the same as the black lever, and they deserve the same warning. The kit is built for a 40mm cartridge, so the cartridge size is the first number to check. The stem shape is the second number, and the listing does not state the stem size in the excerpt read, so the stem must be confirmed on the listing before ordering. A universal lever is only universal within its cartridge size, and a 40mm lever will not fit a 35mm or 45mm cartridge. Do not order by the finish alone.

This pick carries the weakest sourcing in the guide, and that needs to be stated plainly. The ASIN here was confirmed from the Canadian storefront product information, not from the United States listing, so the code should be checked through the Amazon API before ordering. The part number is a19062800ux0525, which is a different part number from the black lever, so the two uxcell picks are separate listings in the same kit family, not the same listing in two colors. Confirm the silver finish and the part number together on the listing. The silver uxcell lever is the budget pick in this guide, in the same group as the black lever.

Specs

Spec Detail
Brand uxcell
Part number a19062800ux0525
Material Zinc
Color Silver
Size 40 mm
Handle shape L-shaped lever
Included Handle, knob
Number of pieces 1
Stem size Not stated
Weight Not stated
ASIN B07XD1ZPPG

How to Choose a Kitchen Sink Faucet Handle

Choosing a replacement faucet handle starts with the valve, not with the look. The first step is to find the cartridge size, because a universal lever is built for one cartridge size, and a 40mm lever will not fit a 35mm or 45mm cartridge. If the cartridge is a standard 40mm single-lever cartridge, a universal 40mm lever is the simplest replacement. If the cartridge is a different size, a kit made for that cartridge size is needed.

The second step is the stem. The stem is the metal post the handle sits on, and its shape decides whether the handle will seat. A 10 by 10mm square stem is the most common shape for a 40mm cartridge, and the black uxcell lever in this guide states that stem size plainly. Other faucets use round stems, splined stems, or square stems in different sizes, and a handle made for one stem shape will not fit another. Measure the stem with a caliper or a ruler, and count the splines if the stem is splined.

The third step is the brand and valve series. A Moen Posi-Temp valve needs a Moen Posi-Temp kit, and a Delta 1300 or 1400 valve needs a Delta 1300 or 1400 kit. A universal lever will not fit those valves, because the stem and the screw pattern are brand-specific. Check the valve series on the faucet or in the manual, and match the kit to that series exactly. The fourth step is the handle style and the finish. A lever suits a single-lever faucet where one handle controls hot and cold, while a knob suits a faucet that already has a knob. The finish should match the rest of the faucet trim, because a mismatched handle looks like a repair even when the fit is exact. Each finish is sold under its own code, so confirm the finish and the code together. A kit that includes the screw, the wrench, and the hot and cold marks saves a separate trip for parts.

Frequently Asked Questions

How do I know which replacement handle fits my kitchen faucet?

Start with the cartridge size and the stem shape, because those two numbers decide the fit. A 40mm cartridge with a 10 by 10mm square stem takes a universal 40mm lever, while a brand-specific valve needs the kit made for that valve series. Check the cartridge size in the faucet manual, measure the stem, and match the part number on the listing to the valve series. If the numbers do not match, the handle will not seat, even when it looks right.

Can I use a tub or shower handle on a kitchen sink faucet?

Only when the valve and the stem match. A handle is made for a valve series, not for a room, so a tub and shower kit that fits a Delta 1300 valve will fit any faucet that uses that valve, and it will not fit a faucet that uses a different valve. For a standard single-lever kitchen faucet with a 40mm cartridge, a universal lever is the better choice.

What does a 40mm cartridge mean?

A 40mm cartridge is a single-lever valve cartridge with a 40mm diameter, and it is the most common size in single-lever kitchen faucets. The cartridge is the part inside the faucet body that mixes hot and cold water, and the handle sits on the stem that comes out of the cartridge. A handle made for a 40mm cartridge is sized to fit that stem, and it will not fit a 35mm or 45mm cartridge.

Do replacement handles come with the screws and tools I need?

It depends on the kit. The black uxcell lever in this guide includes the handle, a wrench, a screw, and red and blue hot and cold marks, so the swap can be done with what is in the box. The other kits in this guide are handle-only replacements, so the old screw and marks may need to be reused, and a screwdriver or a hex key may be needed. Check the included components on the listing before ordering.

Conclusion

A kitchen sink faucet handle is a small part with a strict fit, and the right replacement is the one whose cartridge size, stem shape, and valve series match the faucet. The black uxcell 40mm lever is the best starting point for a standard single-lever kitchen faucet, because it fits the common 40mm cartridge and comes with the hardware for the swap. The silver uxcell lever gives the same fit in a finish that matches chrome and stainless trim. The standwme H79, the Ultrimkit kit, and the Moen 100710 cover the Delta and Moen valve series, and each one should be ordered only after the valve series is confirmed. Measure the old handle and the stem, and match the part number on the listing.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Kitchen Sink Faucet Handles: Levers and KnobsCheck price on Amazon