Updated Nov 17, 2026· 8 min read

Key takeaways

  • For a true crepe pan under $100, a carbon steel pan is the realistic choice: the de Buyer Mineral B crepe and tortilla pan is the best fit if you will…

For a true crepe pan under $100, a carbon steel pan is the realistic choice: the de Buyer Mineral B crepe and tortilla pan is the best fit if you will season it and want a thicker, slower-heating surface, while the Matfer Bourgeat Black Carbon Steel crepe pan suits cooks who prefer a welded, rivetless handle in smaller sizes. Dedicated nonstick crepe pans from the big cookware brands are not named here because their current availability is unclear, so a shallow nonstick omelette pan or a cast iron griddle are the fallback options.

A crepe pan is very shallow, with a low flared lip so a spatula slides underneath and batter spreads thin. Size on the label usually refers to the rim, so the flat cooking floor is smaller; Tramontina’s own pan guide notes that a flared 12-inch pan has a flat floor of roughly 9 to 10 inches. This guide covers what makers state for the current options and where the gaps are.

At a glance: crepe pans and close substitutes

Model Best for Key stated specs Limits
de Buyer Mineral B Carbon Steel Crepe and Tortilla Pan Regular crepe makers willing to season a pan Sizes 9.5, 10.25 and 12 inches; 2.5 mm thick; beeswax finish; riveted handle; unseasoned; all stovetops including induction; oven flash use only, 400 F for under 10 minutes; 10.25-inch weighs about 2.93 lb Needs seasoning and hand care; some sizes have shown as sold out; larger sizes can reach the top of this budget
de Buyer Blue Carbon Steel crepe pan Lower-cost carbon steel Thinner steel than the Mineral B line Thinner steel means faster heat swings and less forgiveness
Matfer Bourgeat Black Carbon Steel Crepe Pan Smaller crepes, rivetless handle Sizes 7, 7 7/8, 8 5/8 and 9 1/2 inches; welded handle with no rivets; oven safe; all hobs including induction; lifetime warranty; listed weights 1.33 to 2.1 lb Maximum size 9.5 inches; check size availability
Calphalon Signature Hard-Anodized Nonstick 10-inch Omelette Pan Nonstick, shallow, easy release 10-inch diameter; 1.25 quart; about 2.6 lb; oven safe to 500 F; metal-utensil safe; PFOA-free three-layer nonstick; lifetime warranty An omelette pan, not a flat crepe pan; sides are higher than a crepe pan
Lodge Cast Iron Round Griddle (8-inch and 10.5-inch) Flat cooking surface, pancakes, tortillas 8-inch version about 2.65 lb; 10.5-inch about 10.18 inches wide and 0.68 inch tall; works on any stovetop including induction Not a flared crepe pan; heavy; needs seasoning
Tramontina Professional Nonstick Fry Pan Nonstick all-rounder that can make thin pancakes Sizes 8, 10, 12 and 14 inches; NSF certified; oven safe to 400 F Straight sides make flipping crepes harder

An honest note about the category

Many shoppers type “nonstick crepe pan” and expect a ready-to-use coated pan. In makers’ catalogs, dedicated crepe pans are mostly carbon steel from specialist brands. Cuisinart’s name appears on a nonstick hard anodized crepe pan in some manual lists, but current availability and specifications are unclear, so it is not listed as a pick. If you want a coated pan, a shallow omelette pan or a low-sided nonstick skillet will work, though the lip height changes your technique.

How to choose a crepe pan

Material: carbon steel versus nonstick versus cast iron

Carbon steel heats quickly, responds to heat changes and develops a slick patina with seasoning, which suits crepes cooked quickly at medium-high heat. Nonstick pans release easily from the start but have a coating life and heat limits. Cast iron griddles hold heat well and are durable, but their weight makes swirling batter harder, and they have no flared lip.

Size and cooking floor

Sizes are rim diameters. de Buyer sells 9.5, 10.25 and 12 inch Mineral B crepe pans, and Matfer Bourgeat ranges from 7 to 9.5 inches. A 9.5 to 10.25-inch pan is the common home size, producing crepes big enough for fillings but easy to flip. Bigger pans are fun for galettes and tortillas but harder to handle, especially with a long batter swirl.

Weight and handle

Heavy pans hold heat steadily but are tiring to swirl. The de Buyer 10.25-inch Mineral B lists about 2.93 lb, while Matfer’s pans run from 1.33 lb in 7 inches to 2.1 lb in 9.5 inches. Matfer’s welded handle has no rivets, which the maker says avoids food and bacteria collecting at rivet points. de Buyer’s riveted handle is a more traditional build.

Induction and oven

Both de Buyer and Matfer list compatibility with all stovetops including induction. de Buyer limits oven use to flash use at up to 400 F for under 10 minutes, so these are stovetop pans. Matfer lists the pan as oven safe, but check the manual before using high temperatures.

Seasoning and care

de Buyer’s pan arrives unseasoned with a beeswax coating that is intended to be removed before use. Follow the maker’s seasoning instructions: wash the pan, heat it, build a thin layer of oil, and repeat. After seasoning, wipe or rinse the pan, dry it right away and apply a light coat of oil to prevent rust. Avoid soaking, dishwashers, and acidic ingredients for extended periods, as these can strip the patina.

The picks in detail

de Buyer Mineral B crepe and tortilla pan

The Mineral B is the better-known option among home crepe makers who prefer carbon steel. The 2.5 mm thickness gives better heat stability than thinner pans, and the beeswax finish protects the steel in storage. de Buyer also sells a Crepe Party Box including a 10.25-inch pan, a beechwood spatula and a silicone brush, which is a useful starter bundle if it fits your budget. A few sizes have shown as sold out, so listings differ by size and availability, and the Matfer and de Buyer size ranges should be checked on the maker’s page before you buy.

Matfer Bourgeat Black Carbon Steel crepe pan

Matfer’s range runs from 7 to 9.5 inches, which suits single-serve and small crepes. The welded, rivetless handle and the lifetime warranty are the distinguishing points. If you want a 10-inch or larger pan, this line does not go that large.

de Buyer Blue Carbon Steel crepe pan

de Buyer’s thinner Blue Carbon Steel crepe pan is listed at a lower price than Mineral B. Thinner steel generally heats and cools faster, which can mean more temperature swings. It is a reasonable entry point for anyone unsure about carbon steel.

Calphalon Signature 10-inch omelette pan

If you want nonstick, this 10-inch pan is listed by the maker with a hard-anodized body, three-layer PFOA-free nonstick, metal-utensil safe use and a 500 F oven rating. An oven rating is not a stovetop preheating limit: never heat an empty nonstick pan on high, and keep to low or medium heat. Overheated nonstick coatings can give off fumes that are harmful to pet birds, so ventilate the kitchen. It is not a flat crepe pan, but its sloped sides and 10-inch diameter let you spread thin batter and slide a spatula underneath with practice.

Lodge round griddle

The Lodge 8-inch and 10.5-inch round griddles are flat, work on any stovetop and are pitched for pancakes and tortillas. They lack a flared lip and require seasoning, so they suit people who already own cast iron.

Budget tiers

Tier Examples Trade-off
Budget de Buyer Blue Carbon Steel; Lodge 8-inch round griddle Thinner steel or non-flared shape
Mid-range Matfer Bourgeat Black Carbon Steel; de Buyer Mineral B in smaller sizes Seasoning required
Upper end of this cap de Buyer Mineral B larger sizes or the Crepe Party Box (listed as above the budget for the box) Cost rises with size and bundle
Above the cap Premium copper or clad crepe pans Not covered here

Pick X if…

If you… Pick
Make crepes weekly and will season a pan de Buyer Mineral B 10.25-inch
Want small, single-serve crepes with a rivetless handle Matfer Bourgeat Black Carbon Steel
Want to try carbon steel on the cheap de Buyer Blue Carbon Steel
Want nonstick and accept higher sides Calphalon Signature 10-inch omelette pan
Already own cast iron and want a flat surface Lodge round griddle

Alternatives

  • Nonstick fry pan: a 10-inch pan such as Tramontina’s Professional line (NSF certified, oven safe to 400 F) can make thin pancakes, though straight sides make flipping slower.
  • Electric crepe maker: a plug-in griddle may be easier for beginners; follow the manual and check the electrical rating.
  • Higher tier: if you can spend above the cap, look for heavier-gauge carbon steel or copper-core crepe pans from specialist makers.

Care and safety

Carbon steel pans get very hot and the handles can too, so use a towel or mitt. Never leave oil heating unattended, since seasoning oil can smoke and ignite if overheated. Dry carbon steel and cast iron promptly to prevent rust, and do not run them through the dishwasher. If the beeswax finish or a seasoning layer smokes during first use, ventilate the room and follow the manual’s instructions.

Frequently Asked Questions

What is the best size crepe pan?

A 9.5 to 10.25-inch pan suits most households. Smaller sizes make single-serve crepes, while 12-inch pans make larger rounds that are harder to flip. Remember the flat floor is smaller than the rim diameter.

Do I need a special crepe pan?

No, but it helps. A low, flared lip makes spatula access easier. A nonstick omelette pan or a flat griddle can work with some technique.

Do carbon steel crepe pans need seasoning?

de Buyer’s Mineral B ships unseasoned with a beeswax finish, and the maker’s instructions describe how to prepare it. Seasoning builds a slick surface over repeated use, but it needs care.

Can I use a crepe pan on induction?

de Buyer and Matfer Bourgeat both list compatibility with all stovetops, including induction, for their carbon steel crepe pans. Always read the manual for your model.

Why are some crepe pans sold out?

Some de Buyer sizes have shown as sold out on the maker’s US site, and availability varies by size and color. If a size is unavailable, a neighboring size usually works, adjusting your batter amount.

Can I put a crepe pan in the oven?

de Buyer says its Mineral B is for oven flash use only, up to 400 F and under 10 minutes. Matfer lists its pan as oven safe. Calphalon lists 500 F for the omelette pan. Follow each maker’s guidance.

K
Kzkk22 Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.