Key takeaways
- Find the best kitchen paper towel holders for countertops, walls, and under cabinets. Compare five sturdy stands and mounts and pick the right fit.
A good paper towel holder keeps the roll within reach, stops it from unraveling across the counter, and lets you tear off a sheet with one hand while the other holds a pan or a cutting board. The best kitchen paper towel holders do that without tipping over, sliding around, or demanding a permanent change to your cabinets. This guide compares five holders across the three main styles: countertop stands, wall mounts, and under-cabinet mounts.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For controlled one-handed tearing, the simplehuman Tension Arm stand is the strongest all-round pick, with a precision-tuned tension arm and a weighted base. The OXO Good Grips SimplyTear is the best-known alternative for the counter, while the YUMORE heavy-duty stand suits households that want the heaviest base in the group. For kitchens with no spare counter space, the Kamenstein Perfect Tear wall mount uses a ratchet to release one sheet at a time, and the Bollove under-cabinet holder installs with adhesive or screws and keeps the roll hidden beneath a cabinet.
Table of Contents
- How to Choose a Paper Towel Holder
- 1. simplehuman Tension Arm Countertop Paper Towel Holder
- 2. OXO Good Grips SimplyTear Paper Towel Holder
- 3. YUMORE Heavy-Duty Countertop Paper Towel Holder
- 4. Kamenstein Perfect Tear Wall Mount Paper Towel Holder
- 5. Bollove Self Adhesive Under Cabinet Paper Towel Holder
- Paper Towel Holders at a Glance
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Paper Towel Holder
Start with placement. A countertop stand needs a clear patch of counter near the sink or stove, plus enough height clearance under any upper cabinet. A wall mount needs a bare stretch of wall or the side of a cabinet, while an under-cabinet holder needs a flat cabinet underside with room for the roll to hang and spin freely.
Next, check roll fit. Standard rolls measure about 11 inches tall, but jumbo and mega rolls are wider and heavier. If your household buys jumbo rolls, pick a holder that lists jumbo compatibility rather than hoping for the best.
Tear control separates a good holder from a frustrating one. Tension arms, spring-loaded arms, and ratchet mechanisms all add resistance so the roll stops spinning after one sheet. Open-spindle stands without any resistance let the roll unwind freely, which wastes towels and makes one-handed tearing harder. A weighted base or a secure mount matters just as much, because a light holder tips or slides when you pull hard.
1. simplehuman Tension Arm Countertop Paper Towel Holder
The simplehuman Tension Arm stand is the premium countertop pick in this roundup. A precision-tuned tension arm presses against the roll and provides just enough resistance to tear one sheet or several cleanly with one hand, without the roll unraveling. The heavy weighted base keeps the holder steady on the counter when you pull, and a finger loop on top makes it easy to pick up and move the whole stand.
The brushed stainless steel finish matches most modern kitchens, and the stand is listed for standard 11-inch paper towel rolls. The manufacturer notes that the holder pairs with its own jumbo paper towels for fewer roll changes, so households that buy larger rolls should check the fit before ordering. The item weighs 2.7 pounds, which gives it real heft for a countertop stand.
Specs
| Spec | Detail |
|---|---|
| Mounting type | Countertop stand |
| Material | Stainless steel |
| Finish | Brushed stainless steel |
| Weight | 2.7 pounds |
| Roll fit | Standard 11-inch rolls |
| Tear mechanism | Precision-tuned tension arm |
| Base | Weighted stainless steel |
| Extra feature | Finger loop for carrying |
| Model number | KT1203 |
2. OXO Good Grips SimplyTear Paper Towel Holder
The OXO Good Grips SimplyTear is the most widely recognized paper towel holder on this list, and its spring-activated arm is the reason. The arm presses on the roll and adds resistance, so a one-handed pull stops at one sheet instead of unspooling several. The weighted stainless steel base has a non-slip ring underneath, which helps the stand stay put during a firm sideways tug.
At 7 inches in diameter and 13 inches tall, the SimplyTear needs about 7 inches of clear counter and enough headroom under any upper cabinet. The listing states that it accepts any roll size or brand, which covers mega rolls that narrower stands cannot hold. The brushed stainless steel body has black plastic accents, and the stand weighs 1.9 pounds.
Reloading is simple, because the design uses built-in resistance rather than a top cap that must be unscrewed. The open design means the roll is always visible, so you can see at a glance when it is running low. This is the mid-range pick for a household that wants proven one-handed tearing without paying a premium.
Specs
| Spec | Detail |
|---|---|
| Mounting type | Countertop stand |
| Material | Brushed stainless steel with black plastic accents |
| Finish | Brushed stainless steel |
| Dimensions | 7 inches diameter by 13 inches high |
| Weight | 1.9 pounds |
| Roll fit | Any size or brand, per the listing |
| Tear mechanism | Spring-activated arm |
| Base | Weighted steel with non-slip ring |
| Model number | 1066736 |
3. YUMORE Heavy-Duty Countertop Paper Towel Holder
The YUMORE heavy-duty stand is the stability pick in this roundup. Its thick weighted base is listed at 3.6 pounds, making it the heaviest base among the countertop stands here, and the total item weight is listed at 3.98 pounds. That weight is the point: a heavy base resists tipping and sliding when you tear with one hand, even during a quick or forceful pull.
The stand is made from stainless steel in a matte black finish, which hides fingerprints and water spots better than polished metal. A non-slip pad under the base adds grip on smooth countertops. The design is a simple open spindle with no tension arm, so tearing control comes from the base weight and the non-slip pad rather than a mechanism pressing on the roll.
Specs
| Spec | Detail |
|---|---|
| Mounting type | Countertop stand |
| Material | Stainless steel |
| Finish | Matte black |
| Base weight | 3.6 pounds |
| Item weight | 3.98 pounds |
| Roll fit | Standard and jumbo rolls, per the listing |
| Tear mechanism | Not stated |
| Base | Weighted with non-slip pad |
| Model number | Not stated |
4. Kamenstein Perfect Tear Wall Mount Paper Towel Holder
The Kamenstein Perfect Tear is the wall-mount pick, and it is the only holder here that uses a patented ratchet mechanism. The ratchet clicks the roll round one sheet at a time, so a one-handed pull cannot unwind a long strip of towel. That gives the control of a dispenser while keeping the roll open and easy to replace.
The holder mounts on a wall or under a cabinet, which frees the counter entirely. The flexible die-cast aluminum roller takes regular, select-a-size, and jumbo rolls, per the listing, and rolls usually slide on without removing the end cap. The 14-inch size is the only dimension listed, and the mounting hardware is not detailed in the listing, so measure your space and check the hardware before installation.
The brushed silver metal finish suits most kitchens, and the rounded finial gives the holder a classic look that works with traditional as well as modern decor. This is the pick for a kitchen with no spare counter, a garage bench, or any spot where a wall-mounted roll is easier to reach. It is less suited to a renter who cannot drill, because it is a fixed mount with no adhesive option listed.
Specs
| Spec | Detail |
|---|---|
| Mounting type | Wall mount or under cabinet |
| Material | Die-cast aluminum |
| Finish | Brushed silver metal |
| Size | 14 inches |
| Weight | Not stated |
| Roll fit | Regular, select-a-size, and jumbo rolls |
| Tear mechanism | Patented ratchet, one sheet per pull |
| Base | Not applicable, wall mounted |
| Model number | 4554ASB |
5. Bollove Self Adhesive Under Cabinet Paper Towel Holder
The Bollove under-cabinet holder is the budget pick and the best option for a renter who cannot drill. It installs with self-adhesive strips or with screws, so you can choose the no-drill route now and switch to screws later if the adhesive ever loosens. The stainless steel bar mounts under a cabinet, on a wall, or on the side of a cabinet, and the roll hangs below it, out of the way but within reach.
The rod measures about 13.19 inches across, which fits standard paper towel rolls, and the mounting panel measures about 5.7 inches by 1.77 inches. The holder is about 3.5 inches deep once the mounting panel and the rod are combined, so check that the roll clears the cabinet door and any items stored below. The black finish suits dark cabinets and modern kitchens, and the same design is also listed in silver and gold finishes.
Because the holder weighs only 5.99 ounces, it adds almost no load to the cabinet it hangs from. The listing also notes that the bar can hold rolls of plastic wrap, which makes it a flexible piece of kitchen organization. This is the pick for a small kitchen where counter space is precious and the roll needs to disappear under a cabinet, and for a renter who wants a holder that leaves no holes behind.
Specs
| Spec | Detail |
|---|---|
| Mounting type | Under cabinet or wall mount |
| Material | Stainless steel |
| Finish | Black |
| Rod length | 13.19 inches |
| Mounting panel | 5.7 by 1.77 inches |
| Depth | About 3.5 inches |
| Weight | 5.99 ounces |
| Installation | Self-adhesive or drilling |
| Roll fit | Standard rolls |
Paper Towel Holders at a Glance
| Holder | Mounting | Tear Control | Best For |
|---|---|---|---|
| simplehuman Tension Arm | Countertop | Tension arm | One-handed tearing |
| OXO Good Grips SimplyTear | Countertop | Spring-activated arm | Everyday countertop use |
| YUMORE Heavy-Duty | Countertop | Weighted base | Maximum stability |
| Kamenstein Perfect Tear | Wall or under cabinet | Ratchet | Saving counter space |
| Bollove Under Cabinet | Under cabinet or wall | Not stated | Renters and small kitchens |
The three countertop stands cover the full range of tear control, from the simplehuman tension arm to the OXO spring arm to the YUMORE heavy base. The two mounts cover the two ways to get the roll off the counter: a fixed ratchet mount for permanent installation, and an adhesive mount for renters and small kitchens. The Bollove is the budget pick, the OXO and YUMORE sit in the mid-range, and the simplehuman is the premium countertop stand, with the Kamenstein wall mount in the middle.
Frequently Asked Questions
What is the best paper towel holder for one-handed tearing?
The simplehuman Tension Arm stand is the strongest choice for one-handed tearing, because its precision-tuned tension arm holds the roll while you pull and its weighted base keeps the stand in place. The OXO Good Grips SimplyTear is the best-known alternative, with a spring-activated arm that serves the same purpose at a mid-range position. The Kamenstein Perfect Tear wall mount is the best mounted option, because its ratchet releases one sheet at a time.
Do paper towel holders fit jumbo rolls?
Some do and some do not, so check the listing before ordering. The OXO SimplyTear states that it accepts any roll size or brand, and the Kamenstein Perfect Tear lists regular, select-a-size, and jumbo rolls. The simplehuman Tension Arm is listed for standard 11-inch rolls, so households that buy jumbo rolls should confirm the fit first. The YUMORE stand lists standard and jumbo rolls, while the Bollove under-cabinet holder is built around a 13.19-inch rod for standard rolls.
Are under-cabinet paper towel holders hard to install?
Under-cabinet holders are among the easiest mounts to install. The Bollove holder offers two options: self-adhesive strips that stick to a clean, flat cabinet underside with no tools, or screws for a more permanent grip. Adhesive installation suits renters, while screws suit a busy kitchen where the holder gets pulled hard every day. Measure the cabinet underside first and check that the hanging roll clears the cabinet door and anything stored below.
How do I keep a countertop paper towel holder from tipping over?
Weight and grip are what keep a stand in place. Choose a holder with a weighted base, like the YUMORE stand with its 3.6-pound base, and look for a non-slip ring or pad underneath. A tension arm or spring arm also helps, because it stops the roll from spinning freely and reduces the force that pulls the stand sideways. Place the stand on a flat, dry patch of counter rather than near the edge, and keep it away from the sink splash zone where the base can get wet and slippery.
Conclusion
The best kitchen paper towel holder is the one that matches where your roll will live and how your household tears. For most kitchens, a countertop stand is the simplest answer, and the simplehuman Tension Arm leads the group for controlled one-handed tearing, with the OXO SimplyTear close behind as the proven mid-range choice. Households that tear hard and often should look at the YUMORE heavy-duty stand, whose weighted base is the sturdiest in this roundup.
When counter space is the limiting factor, a mount is the better answer. The Kamenstein Perfect Tear wall mount gives ratchet-controlled one-sheet pulls without using any counter, and the Bollove under-cabinet holder hides the roll beneath a cabinet with an adhesive option that suits renters. Measure your space, confirm the roll size you buy, and pick the mounting style that fits your kitchen before you pick a finish.